Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Next revision
Previous revision
en:mervis-scada:90-how-to:45-alarm-sms [2018/03/06 18:07]
d.szantai created
en:mervis-scada:90-how-to:45-alarm-sms [2018/03/28 12:56]
m.chlupac [Alarm SMS]
Line 1: Line 1:
 ====== Alarm SMS ====== ====== Alarm SMS ======
  
-The user can be informed by SMS about changing ​the state of the alarm point.+The user can be informed by SMS about change of the state of the alarm point.
  
 SMS text can be defined by user, but in most cases is used a default form, which includes: SMS text can be defined by user, but in most cases is used a default form, which includes:
Line 10: Line 10:
  
  
-The user can confirm ​an alarm, if he has sufficient rights to do so, by sending an SMS to the phone number, from which the message was originally sent.+The user can acknowledge ​an alarm, if he has sufficient rights to do so, by sending an SMS to the phone number, from which the message was originally sent.
  
-For confirming ​the alarm, it is necessary to write the keyword **ok** followed by a space and the received confirmation code. E.g.:+To acknowledge ​the alarm, it is necessary to write the keyword **ok** followed by a space and the received confirmation code. E.g.:
 <​code>​ok s44</​code>​ <​code>​ok s44</​code>​