Differences

This shows you the differences between two versions of the page.

--- en:mervis-scada:90-how-to:45-alarm-sms [2018/03/06 18:07]
d.szantai created
+++ en:mervis-scada:90-how-to:45-alarm-sms [2018/03/28 13:56] (current)
@@ Line 1: / Line 1: @@
 ====== Alarm SMS ======
-The user can be informed by SMS about changing the state of the alarm point.
+The user can be informed by SMS about change of the state of the alarm point.
 SMS text can be defined by user, but in most cases is used a default form, which includes:
@@ Line 10: / Line 10: @@
-The user can confirm an alarm, if he has sufficient rights to do so, by sending an SMS to the phone number, from which the message was originally sent.
+The user can acknowledge an alarm, if he has sufficient rights to do so, by sending an SMS to the phone number, from which the message was originally sent.
-For confirming the alarm, it is necessary to write the keyword **ok** followed by a space and the received confirmation code. E.g.:
+To acknowledge the alarm, it is necessary to write the keyword **ok** followed by a space and the received confirmation code. E.g.:
 <code>ok s44</code>