Differences

This shows you the differences between two versions of the page.

--- en:mervis-proxy:00-start [2016/12/10 10:11]
m.chlupac created
+++ en:mervis-proxy:00-start [2022/05/10 11:56] (current)
m.chlupac [List of supported systems and protocols]
@@ Line 1: / Line 1: @@
 ====== Mervis Proxy ======
-The Proxy Server is the solution for communication from non-public or “hostile” network environments. It allows fully transparent communication over the Internet among controllers or communication with other clients, like supervision systems (e.g. Mervis SCADA).
+**Mervis Proxy** service can be used for reliable communication with Mervis powered controllers without a public IP address, port forwarding etc.
-There is no need to use port-forwarding, public IP addresses and similar “special” settings. There is no need to negotiate some special rules with local IT department. Controller using Proxy Server works as an ordinary web browsing computer and if the web access is allowed in the network then the Proxy Server can be used.
+Please find below the detail description of Mervis Proxy service or similar services that can be used with Mervis IDE or Mervis SCADA.
-For maximum compatibility standard encrypted communication via HTTPS (or HTTP if required) is employed and therefore Proxy Server can be freely used in most network environments.
+===== What you need to use the service =====
+To be able to use Mervis Proxy (proxy.mervis.info) you need a ProxyID or name and password - usually supplied by the manufacturer of your system. If you have not received one then please contact our [[:en:help:support|technical support]].
+===== List of supported systems and protocols =====
+  * [[en:mervis-proxy:sscp|SSCP Protocol ]](Mervis, Merbon, Domat, UniPi, Wago)
+  * [[cs:mervis-proxy:db-net|DB-Net/IP]] (Amit)
+  * [[en:mervis-proxy:softplc-link|SoftPLC Link]] (RcWare, Domat)
+  * [[en:mervis-proxy:comap-airgate|ComAp Airgate]]  works in a similar way as Mervis Proxy and can be used by Mervis SCADA for communication of data from ComAp controllers.
+  * [[en:mervis-scada:80-mqtt:00-start|MQTT]] (Wago, Teco/Foxtrot)
-The Proxy Server supports standard data communication and also almost complete engineering capabilities needed during the installation of the control system and building commissioning. Greatly reduced cost and much smoother tuning of the control system are just few of the apparent benefits.