====== I/O Transformation with Linear Shift ======

==== Full Name ====

Lib.Mervis.v1_0.LinearWithShift

==== Required Project References ====

  * Lib.Mervis

===== Implemented Directions =====

|Direction from User's Perspective|Direction from ITransform's Perspective|Input Data Type|Output Data Type|
|IO -> ST                         |Forward                                |dint            |real            |
|ST -> IO                         |Reverse                                |real            |dint            |

===== Parameters =====

**Transformation parameters are always specified in the IO -> ST direction!!!**

|Name  |Data Type|Retain|Meaning|
|Shift |usint    |No    |Determines how many bits to shift the input variable to the right|      |
|K     |real     |No    |Multiplier                                                  |      |
|Q     |real     |No    |Offset                                                      |      |
|Min   |real     |No    |Minimum possible output value                               |      |
|Max   |real     |No    |Maximum possible output value                               |      |

Parameters are applied in the following order (in the case of reverse transformation, everything happens in reverse):
  - Clipping the input value to the range Min..Max
  - Bit shift to the right
  -  Applying the linear transformation K * x + Q