Table of Contents
Bulk Message Sender (8 inputs)
Full name
Lib.Mervis.v1_0.MessageSender
Required Project References
- Lib.Mervis
Description
Usage in ST
program test
var
sender: lib.mervis.v1_0.MessageSender;
end_var
sender();
end_program
Inputs
| Name | Data Type | Retain | Must Connect | Meaning | |
| Input1 | bool | No | No | Rising edge sends message Message1 | |
| Input2 | bool | No | No | Rising edge sends message Message2 | |
| Input3 | bool | No | No | Rising edge sends message Message3 | |
| Input4 | bool | No | No | Rising edge sends message Message4 | |
| Input5 | bool | No | No | Rising edge sends message Message5 | |
| Input6 | bool | No | No | Rising edge sends message Message6 | |
| Input7 | bool | No | No | Rising edge sends message Message7 | |
| Input8 | bool | No | No | Rising edge sends message Message8 | |
| Message1..Message8 | string | No | No | Message corresponding to the respective input Input* | |
| MessagingChannel | string | No | No | Name of the channel used for sending messages | |
| Recipient | string | No | No | Message recipient (either email or phone number in international format +420… 00420…) | |
| Sender | string | No | No | Sender's email (only if sending via email) | |
| Subject | string | No | No | Email subject (only if sending via email) | |
| SmsOrEmail | string | No | No | Specifies whether it is an SMS (=true) or email (=false) channel |
Outputs
| Name | Data Type | Meaning | |
| LastStatus | int | Status of the last performed operation (sending SMS or email) |