Service web

The service web allows IP configuration of the PLC over the PLC’s web server, without using IDE. Defined users in the HMI User rights tab must have allowed reading or writing at “SystemConfiguration”.

If the “SystemConfiguration” rights are allowed for writing, user has full control over the service web settings. The “SystemConfiguration” read-only rights only allow displaying of the configuration, with no editing rights.
Confirm changes by clicking “OK” and upload the web to the PLC.

If the logged in user has read or write rights to System Configuration, a configuration icon is displayed in the upper right corner.

Confirm the changes by clicking the “Set” button after editing. The PLC reboots automatically (warm reboot) and all changes are applied.