====== System status ======

The system status will be displayed at the debugging which can be started after the project has been uploaded to the PLC. Click the "Start debugging" button in the ribbon.

{{:en:mervis-ide:35-help:stat1.png}}

There is a prompt which PLC has to be debugged (or, connected to). This is to select a PLC in a network (Solution) where more PLCs are defined. The system status is displayed in the "Task status" tab which will be opened automatically or in the //View - Task status// menu.

{{:en:mervis-ide:35-help:stat2.png}}

The "Start debugging" button starts debugging immediately if there is only a single PLC in the Solution. If there are more PLCs, a prompt opens, and more PLCs or just a selected PLC can be debugged at the same time.

===== System status information displayed - PLC =====

  * Uptime - How long the program has been running since restart
  * Task number - How many tasks there is in the PLC.
  * Evaluation status - Current status or mode of the PLC activity.
  * Running tasks mask - Correctly running tasks.
  * Failed tasks mask - Failed tasks.
  * UTC time - Time which is set in the PLC, as Universal Time Coordinated (London time).

==== Memory ====

Status of total and used memory in the PLC. VMEX memory: internal memory for the virtual machine. RTCM memory - memory used for communication purposes (all channels, buffers, communication variables).

==== Channels ====

Displays sent, received and faulty packets, and error statistics for every channel. //ep// (endpoint) indicates how long a communication takes for a particular channel.

==== Services ====

Mervis DB shows the status of communication with the Mervis database (in case the Mervis DB connection is configured).

Proxy shows communication status of the Proxy server.

==== Task ====

Displays information about time necessary to complete the entire task and how many times a task has been run since restart.

{{:en:mervis-ide:35-help:stat3.png}}